Node: Interactive LED Processor

The LED Processor Input node allows you to communicate with an LED processor that provides interactive data over the local network. Currently, only the NovaStar MCTRL510 LED Processor and compatible are supported. A LED Tile Layout Node provides information about the tiles connected to the processor, and the touches seen from the processor as provided as a List<Touch>.

Settings

	Expected Type	Details	Default
localInterface	LocalInterface	The local network adapter that will be used to communicate with the LED processor.	LocalInterface("0.0.0.0")
remoteAddress	RemoteAddress/IP	The address of the LED processor on the network, including its port (for NovaStar MCTRL510 processors this is always 6000). This IP address of the process can be configured using the Companions: Nova SetIP tool.	IP("192.168.11.2", 6000)
cabinetLayout	LedCabinetLayout	The layout of LED tiles connected to this processor, typically configured using a LED Tile Layout Node.

Parameters

	Type	Details
touches	List<Touch>	Note: The parameter is read-only. The raw touches current seen by the LED processor.
tileOutlineMaterial	Material	Note: The parameter is read-only. A material showing the outlines of the tiles connected to the LED processor as defined by the cabinetLayout parameter
tileDebugMaterial	Material	Note: The parameter is read-only. A material showing the outlines of the tiles connected to the LED processor as defined by the cabinetLayout parameter, as well as additional markings on each tile for debugging.

Functions

There are no functions exposed by this node.

Example Usage

No examples provided.